Skip to main content

Isis NFC payment system gets its first market in Salt Lake City, Utah, launches in 2012

Like 3D on high-end HDTVs, NFC-based payment systems seem set to invade our mobile lives whether we like them or not. Isis, a collaborative venture between AT&T, T-Mobile, Verizon and a bunch of banking big timers, has today announced the first market for its rollout of a contactless payment scheme, and it's none other than Salt Lake City, Utah. That'll surely raise eyebrows in locales that may consider themselves more tech-savvy, but we reckon starting off with a city of a smaller scale might be good for getting this "mobile wallet" system off the ground. And then there's the added benefit of Isis snagging a deal to enable compatibility with the entire Utah Transit Authority footprint. If all plans are executed properly, that should mean that by summer 2012 the good people of SLC will be able to NFC their way around town with just their smartphone in hand, while also swiping it through checkouts like some form of highly advanced techno-humans.


Isis Advances Mobile Commerce with First Market

Isis Rolls Out Mobile Commerce Program in Salt Lake City and Partners with Utah Transit Authority to Make Entire Transit System Isis-Enabled

SALT LAKE CITY--(BUSINESS WIRE)--Isis, the mobile commerce joint venture between AT&T Mobility, T-Mobile USA and Verizon Wireless, today announced it will pilot the Isis mobile commerce program in Salt Lake City in early- to mid-2012. Isis has also entered into an agreement with Utah Transit Authority (UTA) to make the entire UTA transit system Isis-enabled, marking the deployment of Isis as the first commercially available mobile transportation fare payment program in the U.S. Additionally, Isis is investing in the necessary infrastructure to enable mobile commerce on a nationwide basis and will be available to all merchants, banks, payment networks and mobile carriers.

"By working with the Utah Transit Authority, Salt Lake Chamber and Salt Lake City-area merchants, Isis is bringing the mobile commerce vision to reality. Salt Lake City consumers will experience a new way to shop, pay and save," said Michael Abbott, chief executive officer at Isis.

Salt Lake City: The Place You Can Leave Your Wallet At Home

Isis, which announced its formation in mid-November 2010, is focused on bringing mobile commerce to Salt Lake City using mobile phones to make point-of-sale purchases through the use of near-field communication (NFC) technology. The Isis system will evolve to offer customers a highly secure and convenient way to pay, redeem coupons and store merchant loyalty cards, all with the tap of their phone.

The Isis mobile payment program will roll out in 2012 and allow consumers to use their Isis-enabled mobile phones to make point-of-sale purchases at retailers across the Salt Lake City area and on UTA transportation.

"On behalf of the residents of Salt Lake City & County, Mayor Corroon and I would like to express our excitement that the Salt Lake City area has been chosen to lead the roll-out of Isis mobile payments," said Mayor Ralph Becker, Salt Lake City.

"We are pleased Isis mobile payments will be available throughout the Salt Lake City area starting with the relationship with UTA, and we look forward to many other merchants throughout the county offering this exciting mobile commerce service," added Mayor Peter Corroon, Salt Lake County.

UTA is a pioneer in contactless payments for transit in the U.S., having implemented a "tap on, tap off" system in early 2009. The existing system, which allows consumers to pay with their contactless credit and debit card by tapping an electronic fare reader on a bus or train platform, will allow Isis-enabled mobile phone users to pay using their phone.

"Partnering with Isis is a critical step forward in widespread mobile contactless acceptance throughout the Salt Lake City area," said Michael Allegra, General Manager at Utah Transit Authority. "Isis allows us to build upon our existing 'tap on, tap off' system, and provide our customers with a new, more convenient way to use public transportation using only a mobile phone."

"Salt Lake City is on the cutting edge in so many ways and we are committed to incorporating promising technologies to improve the quality of life for the people of our community," said Lane Beattie, president and CEO of the Salt Lake Chamber. "As Utah's largest business association representing over half the state's workforce, we are excited about Isis as it gives our merchants a way to streamline their transactions and, more importantly, connect with their customers."

About Isis

The joint venture is between AT&T Mobility LLC, T-Mobile USA and Verizon Wireless and is based in New York City. The venture is chartered with building ISIS™, a national mobile commerce venture that will fundamentally transform how people shop, pay and save. The Isis mobile commerce network will be available to all merchants, banks, payment networks and mobile carriers. Isis is a trademark of JVL Ventures, LLC in the U.S. and/or other countries. Other logos, product and company names mentioned herein may be the trademarks of their respective owners.

www.paywithisis.com
Labels:

Comments

Post a Comment

Popular posts from this blog

Pentax releases O-GPS1 add-on for DSLRs, appeals to astronomy nuts

Pentax's Optio WG-1 GPS point-and-shoot satisfied geotaggers out of the box, but owners of its K-5, K-r and 645D DSLRs have had to make do with third-party taggers like the PhotoTrackr or Eye-Fi. The new hotshoe-mounted O-GPS1 module fixes that oversight by recording latitude, longitude, altitude, Coordinated Universal Time and shooting angle. Everyday snappers might find an extra hotshoe attachment cumbersome, but astro-photography enthusiasts could well be enticed by the device's interesting "ASTROTRACER" function. This helps you take clearer photos of celestial bodies by using the in-built sensors to calculate a star's movement and then employing the camera's shake reduction system to compensate. Sounds clever, but be advised: this module is only for Pentax DSLRs -- and only for very specific models at that. You'll get full functionality with the K-5 and K-r cameras, and geotagging (no ASTROTRACER) with the 645D. Oh, and you'll need to make sure yo
Post a Comment
Read more

Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim

Desktops Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim By Sean Hollister posted Apr 6th 2011 8:43PM Now that Commodore USA has sufficiently piqued your curiosity with a revamped Commodore 64 prototype, it's ready to capitalize on the idea. Quite literally, we might add. $595 buys you the basic basic model with an 1.8GHz dual-core Intel Atom D525 chip, NVIDIA ION 2 graphics, 2GB of RAM and a 160GB hard drive -- which it promises to deliver by "early June" -- with hundred-dollar increments adding premium features like an additional 2GB of memory, a Blu-Ray drive, up to 1TB of storage, 802.11 b/g/n WiFi and Bluetooth. However, if you're simply looking for a compact keyboard computer (rather than reliving 80's nostalgia) there's another option on tap -- a likely rebadged thin wedge of a machine that Commodore's
Post a Comment
Read more

CNC mill and Sixaxis controller make beautiful DIY music together (video)

Have you ever thought to yourself, "my CNC mill is pretty cool, but I really want to make it more awesomer"? Well, first, "awesomer"  totally  isn't word, and second, have we got a hack for you! A reader wrote in to the DIY hub Adafruit to show off his CNC being operated by a PS3 Sixaxis controller -- mimicking features found on high-end machines that allow you to trigger jobs from a distance and manually control the mill. Best of all, it's a pretty simple mod that uses a program called QtsixA to map the gamepad as a keyboard and mouse, allowing you to interact with a Linux box running EMC2, which is used for controlling the mill, lathe, plasma torch, or a number of other fun and dangerous tools. Check out the video after the break. Adafruit dammitdarrell (YouTube)
Post a Comment
Read more