Skip to main content

Nyko Power Pack+ and Charge Base for Nintendo 3DS review

When we reviewed the Nintendo 3DS (both times) there were some things we liked and others we didn't, but one thing stood out as a true flaw: the battery life. Three to four hours on a charge just doesn't cut it when portable game systems are traditionally known for shrugging off entire international flights. The 3DS would struggle with a puddle-jumper. Now, Nyko says it has a fix, and have released a battery backpack that promises twice the life of the stock console. Does it deliver? Not quite, but close.

Hardware and installation

Lest you get confused, Nyko actually has two distinct products here: the battery itself and the Charge Base which you plug it into. For $19.99 you can get yourself just the Power Pack+ (the battery), but using it sadly will prevent you from using Nintendo's standard charging base, with its trick, flip-out charging contacts. So, Nyko also offers the Charging Base as well, which is $29.99 and includes the battery pack. So, $10 more for the full package, then.

This charging base is rather bulkier than the stock one, and rather blingier too. It features a glowing power light and, when you set the system down, LEDs on the side illuminate your desk to indicate whether it's charging (red) or charged (green). It's a little excessively loud, but is certainly easier than squinting to see the tiny orange LED Nintendo put on the 3DS itself.

Installation of the pack requires the removal of a few screws on the back, pulling off the backplate, and the extrication of the stock 3DS battery. This system completely replaces it. Overall the process takes just a few minutes if you don't lose any of those tiny screws -- or the tiny screwdriver Nyko includes.

Once on the system is roughly one-third thicker than before, though Nyko did thoughtfully contour the back and threw a rubberized coating on there to boot. Naturally this adds some weight, too, up to 280 grams from the stock console's 240. Not a lot, but it's a noticeable difference.

Testing

We cycled the battery pack a few times to let things get comfortable before testing, as Nyko indicated that, for the first time at least, you should charge by plugging the stock Nintendo power adapter straight into the 3DS itself. Afterward you can plug that adapter into the base and leave it alone. We would have liked to see a second power adapter included here, and it would have been even nicer if Nyko had moved away from the proprietary plug and gone with a microUSB. Alas, you can't have everything.

We ran a number of tests, each time using Pilotwings as our demo game with the brightness and 3D slider max'd -- how we figure most gamers will be playing it. Consistently we scored four hours of battery life with WiFi enabled. Turned off the system managed just under five hours. The stock 3DS in the same configuration, meanwhile, managed two hours thirty minutes with WiFi enabled, about 2:45 with it disabled.

We should also mention that the first charging base we received would consistently cause the official Nintendo adapter to short out. Put the console in, hit the power button, and the world would go dark -- well, the Charge Base would, anyway. To get it to work again we'd have to unplug the adapter from the wall and let it chill out for a few minutes. Nyko shipped us a replacement, which worked just fine. Hopefully this is an isolated incident, but given our pals at Joystiq had an issue in their first batch too, you might want to make sure you get yours tested long before your return period expires.

Wrap-up

So we didn't see quite double the battery life, but we'll call it close enough. That said, the extra bulk is certainly noticeable, and whether or not you can live with it is, of course, up to you -- and the confines of your pockets.

Comments

Popular posts from this blog

Pentax releases O-GPS1 add-on for DSLRs, appeals to astronomy nuts

Pentax's Optio WG-1 GPS point-and-shoot satisfied geotaggers out of the box, but owners of its K-5, K-r and 645D DSLRs have had to make do with third-party taggers like the PhotoTrackr or Eye-Fi. The new hotshoe-mounted O-GPS1 module fixes that oversight by recording latitude, longitude, altitude, Coordinated Universal Time and shooting angle. Everyday snappers might find an extra hotshoe attachment cumbersome, but astro-photography enthusiasts could well be enticed by the device's interesting "ASTROTRACER" function. This helps you take clearer photos of celestial bodies by using the in-built sensors to calculate a star's movement and then employing the camera's shake reduction system to compensate. Sounds clever, but be advised: this module is only for Pentax DSLRs -- and only for very specific models at that. You'll get full functionality with the K-5 and K-r cameras, and geotagging (no ASTROTRACER) with the 645D. Oh, and you'll need to make sure yo

Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim

Desktops Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim By Sean Hollister posted Apr 6th 2011 8:43PM Now that Commodore USA has sufficiently piqued your curiosity with a revamped Commodore 64 prototype, it's ready to capitalize on the idea. Quite literally, we might add. $595 buys you the basic basic model with an 1.8GHz dual-core Intel Atom D525 chip, NVIDIA ION 2 graphics, 2GB of RAM and a 160GB hard drive -- which it promises to deliver by "early June" -- with hundred-dollar increments adding premium features like an additional 2GB of memory, a Blu-Ray drive, up to 1TB of storage, 802.11 b/g/n WiFi and Bluetooth. However, if you're simply looking for a compact keyboard computer (rather than reliving 80's nostalgia) there's another option on tap -- a likely rebadged thin wedge of a machine that Commodore's

CNC mill and Sixaxis controller make beautiful DIY music together (video)

Have you ever thought to yourself, "my CNC mill is pretty cool, but I really want to make it more awesomer"? Well, first, "awesomer"  totally  isn't word, and second, have we got a hack for you! A reader wrote in to the DIY hub Adafruit to show off his CNC being operated by a PS3 Sixaxis controller -- mimicking features found on high-end machines that allow you to trigger jobs from a distance and manually control the mill. Best of all, it's a pretty simple mod that uses a program called QtsixA to map the gamepad as a keyboard and mouse, allowing you to interact with a Linux box running EMC2, which is used for controlling the mill, lathe, plasma torch, or a number of other fun and dangerous tools. Check out the video after the break. Adafruit dammitdarrell (YouTube)