Skip to main content

Reserve Power: Stand Off, Part 1


With handset screens getting larger and applications such as streaming primetime shows and video chat becoming more prevalent, it's not surprising that some handsets such as the HTC Evo 4G include a built-in kickstand. Most phones, though, suffer from LifeCall commercial syndrome –- when they've fallen, they can't get up. To offer some assistance, a whole cottage industry of pocketable products – many with inventive designs -- have appeared to let you enjoy your handset's screen without your hands in the way. But how universal are they?

I tested a variety of popular and unusually-shaped handsets -- including the iPhone 3GS and iPhone 4, Droid 2, Droid X, BlackBerry Bold and BlackBerry Torch, Palm Pre, HP Veer, Samsung Captivate and the monstrous Samsung Infuse -- finding, for example, that some phones fit in some stands only when their physical keyboards were extended. Surprised at how well a few of the stands held up, I even tried them with a few tablets, including the BlackBerry PlayBook, Apple iPad and Motorola Xoom. This column will introduce the first six devices after the break, while the next Reserve Power will discuss several more, conclude with my favorites, and link to a spreadsheet detailing which devices and stands paired appropriately with one another.


3Feet ($15)
http://3feet.com

The beefiest folding stand I tested, the sturdy 3feet can handle nearly any pocketable device you throw at it without breaking a sweat. It can also fit in a pants pocket, although it will take up much of the space therein. The 3feet has two adjustable angles using its main support, and a third leg that allows the device to be raised at a steep incline, say, to be seen from a standing position. It is also one of the few stands of its kind marketed for handsets that can accommodate the iPad and Xoom in both horizontal and vertical orientations. The 3feet can also accommodate the iPad at a shallow typing angle, using its third foldout leg and its bottom lip to prevent the iPad from tipping over, but there was a little too much give; I even preferred using Apple's folio case in the "typing" position over the 3feet for that use case. The 3feet is available in a wide range of colors and you can even mix and match colored parts to, say, show support for your alma mater or favorite sports team.


Agent 18 StandHear ($25)
http://www.agent18.com/productdetail/extras/standhear/157.aspx

The square white-and-gray StandHear is only a so-so stand. For example, while it was able to handle a top-heavy Droid X in portrait orientation, it was a bit touch-and-go due to the device's relatively narrow support leg. However, recessed under the device's lid is a 3.5mm audio cable and on either side is a 3.5mm audio jack. Yes, the StandHear doubles as an audio output splitter so you and a friend don't need to settle for half of the stereo effect in a shared song or video.

Note, though, that due to the very short length of the cable, many handsets will only work with the audio splitter when held in a landscape orientation. This probably isn't a major issue for most consumers, but as video chat-capable handsets proliferate, we may see instances where people would like to share the audio of a remote person while crowding in front of the screen. (The relatively short Pre and BlackBerry Curve with its side-mounted audio jack were exceptions to the landscape orientation dilemma, but neither supports video chat.)


Breffo SpiderPodium (₤15, $20 at Amazon.com)
http://breffo.com/

The Spiderpodium takes the GorillaPod idea of wraparound stabilization and cranks it up from three legs to eight. This provides extraordinary flexibility in how its rubbery appendages cradle virtually any handset on the market. The remainders are used to stabilize the device or wrap it to any number of surfaces, including chair backs or car air conditioning vents. The product's center platform also has a slot to accommodate an Apple 30-pin connector. Tripod screws can even fit through the slot to stabilize compact point-and-shoot digital cameras.

As was once said to another spider-inspired entity, "With great power comes great responsibility." The Spiderpodium's grip on a device or whatever you're looking to affix it to is only as secure as you've bent it to be. The gangly Spiderpodium may not be the prettiest, smallest or quickest handset stand, but it offers the best flexibility in more ways than one. The company also offers a larger version for tablets priced at ₤25. Bravo, Breffo.


elago M1 ($10) and S2 ($10)
http://elagodesign.com/

Design-conscious accessory maker elago has two phone stands. The more versatile one is the hinged M1. Perhaps the smallest such product on the market, the M1 is one of the few one could feasibly attach to a keychain. It opens like a tiny crocodile mouth to reveal two wavy notches for positioning your portable device at one of two angles.

Unlike the M1, the S2 is made from a single piece of metal and provides only one viewing angle. It delivers style, stiffness and simplicity. While the company doesn't advertise it as such, it can also be used as an earbud wrap, although this works better if the buds have equal cable length for each ear as the Apple earbuds do. Still, the S2 doesn't offer a lot of confidence-inspiring support, especially when devices are in vertical orientation.

Griffin Travel Stand ($10)
http://www.griffintechnology.com/products/travel-stand

Wth its moonstone-like shape, the Griffin Travel Stand unfolds to reveal a small dock-like cup that should hold most thin, narrow slate phones. A tall back provides good support in portrait orientation but overall the product provides minimal support for devices in landscape orientation, considering its size. Griffin also includes a small earbud wrap that can fit inside the stand when it's not being used for phone display. On one hand, it's a nice little extra freebie you can use without taking the rest of the case along. On the other hand, since it's separate, it could get lost. Overall, the relatively large size of the Travel Stand and limited device support make it less compelling than its competitors.

iAngle holds your earbuds and your iPhone... at an angle
iAngle ($10)
http://www.iangle.net/

The simple iAngle is a piece of traingular hard rubber with a number of notches and gouges taken out of ether side of its surface, the largest of which create the space to support an iPhone. There is also a canal that runs along its perimeter that, along with two prominent holds in its midde, are designed to support Apple's standard earbuds. The compact iAngle has no moving parts to break, and scores points for doubling as an earphone wrap, but the lack of flexibility of its indentation made it capable of supporting fewer devices than competitors -- particularly in portrait orientation.


Ross Rubin (@rossrubin) is executive director of industry analysis for consumer technology at market research and analysis firm The NPD Group. Views expressed in Reserve Power are his own.

Comments

Popular posts from this blog

Pentax releases O-GPS1 add-on for DSLRs, appeals to astronomy nuts

Pentax's Optio WG-1 GPS point-and-shoot satisfied geotaggers out of the box, but owners of its K-5, K-r and 645D DSLRs have had to make do with third-party taggers like the PhotoTrackr or Eye-Fi. The new hotshoe-mounted O-GPS1 module fixes that oversight by recording latitude, longitude, altitude, Coordinated Universal Time and shooting angle. Everyday snappers might find an extra hotshoe attachment cumbersome, but astro-photography enthusiasts could well be enticed by the device's interesting "ASTROTRACER" function. This helps you take clearer photos of celestial bodies by using the in-built sensors to calculate a star's movement and then employing the camera's shake reduction system to compensate. Sounds clever, but be advised: this module is only for Pentax DSLRs -- and only for very specific models at that. You'll get full functionality with the K-5 and K-r cameras, and geotagging (no ASTROTRACER) with the 645D. Oh, and you'll need to make sure yo

Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim

Desktops Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim By Sean Hollister posted Apr 6th 2011 8:43PM Now that Commodore USA has sufficiently piqued your curiosity with a revamped Commodore 64 prototype, it's ready to capitalize on the idea. Quite literally, we might add. $595 buys you the basic basic model with an 1.8GHz dual-core Intel Atom D525 chip, NVIDIA ION 2 graphics, 2GB of RAM and a 160GB hard drive -- which it promises to deliver by "early June" -- with hundred-dollar increments adding premium features like an additional 2GB of memory, a Blu-Ray drive, up to 1TB of storage, 802.11 b/g/n WiFi and Bluetooth. However, if you're simply looking for a compact keyboard computer (rather than reliving 80's nostalgia) there's another option on tap -- a likely rebadged thin wedge of a machine that Commodore's

CNC mill and Sixaxis controller make beautiful DIY music together (video)

Have you ever thought to yourself, "my CNC mill is pretty cool, but I really want to make it more awesomer"? Well, first, "awesomer"  totally  isn't word, and second, have we got a hack for you! A reader wrote in to the DIY hub Adafruit to show off his CNC being operated by a PS3 Sixaxis controller -- mimicking features found on high-end machines that allow you to trigger jobs from a distance and manually control the mill. Best of all, it's a pretty simple mod that uses a program called QtsixA to map the gamepad as a keyboard and mouse, allowing you to interact with a Linux box running EMC2, which is used for controlling the mill, lathe, plasma torch, or a number of other fun and dangerous tools. Check out the video after the break. Adafruit dammitdarrell (YouTube)