Skip to main content

Eyes on with the VT30, Panasonic's flagship 3D plasma


The latest and greatest (and largest) 3D plasmas from Panasonic are finally shipping, including the flagship, THX-certified Viera VT30 sets with their single sheet of glass panels and Infinite Black Pro2 filters. We first caught a glimpse of these bad boys back at CES and we've been impatiently waiting for a chance to blast our retinas with their PDP goodness in all three dimensions. The company was nice enough to invite us over recently to have a little TV powwow that featured an uncomfortable amount ofAvatar on Bluray. Keep reading after the break for all the not-so-gory details.

Like other Panasonic sets the VT30 is an active 3D display and the company has switched to new fast-switching phosphors to minimize the trailing and ghosting effects sometimes associated with flat panels and 3D content. Under Panasonic's tightly controlled circumstances the difference between its plasmas and the top of the line LCD from a certain competitor were quite noticeable. In fact, the motion response on the VT30 was possibly the best we've ever seen -- there were no visual artifacts of any kind and the colors remained rich and vivid at almost any angle. There was some flickering detectable on the displays, but much of that is attributable to poor planning on Panasonic's part -- the demo room was filled with 3D TVs, all of which were competing for the attention of our active shutter glasses. The company also had a passive 3D set on hand for comparison, and the superiority of the image on the active set was undeniable (the passive set exhibited some noticeable stair-stepping).

As you'd expect, the VT30 features VIERA Connect and is compatible with the associated WiFi adapter. There's also support for DLNA, VIERA Link, a 2D to 3D converter, and an option to adjust the severity and depth of the 3D effect. The VT30 is available in 55- and 65-inch models for $2799.95 and $4299.95 respectively. The mid-range and entry-level GT30 and ST30 lines also scored new super-sized models at 60 and 65 inches, with the primary difference being a lack of single-sheet-of-glass construction and the less "pro" Infinite Black 2 filter, while the ST30 line also loses THX certification. The 60-inch GT30 costs $2799.95 while the 65-inch will run you $3699.95, the ST30s are a slightly more affordable $2399.95 and $3299.95.

Panasonic also told us that its third-generation 3D glasses would be arriving this summer which are expected to be both lighter and cheaper than the current specs, but the company refused to give us anything more than an estimated ship date of July. Hopefully price will be towards the lower end of the $50 to $100 range we've heard tossed about. The VT30 is shipping now, but you'll have to haul yourself to a store to get one -- for the time being it's not available online.

Comments

Popular posts from this blog

Scientist cooks up adjustable strength metals

As you may know, crafting a katana is a delicate process that involves carefully constructing a razor-sharp high-carbon edge around a soft shock-absorbent core. One day though, smiths and forging fires could be replaced by electrode-wielding mad-scientists, with the technology to selectively harden and soften metal at will. At least that's what we envisioned when we read about Jƶrg Weißmüller's breakthrough research in the field of nanomaterials. The German scientist discovered that by placing precious metals in acid he could create tiny ducts through corrosion. Once those channels are flooded with a conductive liquid, electrical currents can be used to harden the material and, if you change your mind about the brittle results, the effect can easily be reversed to make it soft again. The tech could eventually lead to self-healing vehicle armor or scratch-resistant cellphones -- but, really, we just want to zap our way to a high-quality samurai sword. Physorg

Samsung confirms WiFi-only Galaxy Tab availability: April 10th, $350

We've already seen it turn up on a few retail sites, but Samsung has now finally officially confirmed the launch details for its WiFi-only Galaxy Tab. It will be available online and at retail stores across the US on April 10th for $349.99. Specs otherwise remain the same as the 3G version, including a 7-inch 1024 x 600 display, 32GB 16GB of internal storage (with a microSD card slot for up to an additional 32GB), rear and front-facing cameras, and Android 2.2 with support for Flash 10.1 -- from the looks of things, it's also only available with a white back. Full press release is after the break. Note: The original press release incorrectly stated that there was 32GB of internal storage. There is, in fact, only 16GB. Samsung Galaxy Tab™ Available for Purchase at Multiple Retail Stores and Online Outlets Consumers receive chance to purchase WiFi-only version of Samsung's award-winning Android™ platform mobile tablet DALLAS--(BUSINESS WIRE)--Samsung Telecommu...

Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim

Desktops Commodore USA puts the new C64 up for pre-sales, unveils far-less-retrotastic VIC-Slim By Sean Hollister posted Apr 6th 2011 8:43PM Now that Commodore USA has sufficiently piqued your curiosity with a revamped Commodore 64 prototype, it's ready to capitalize on the idea. Quite literally, we might add. $595 buys you the basic basic model with an 1.8GHz dual-core Intel Atom D525 chip, NVIDIA ION 2 graphics, 2GB of RAM and a 160GB hard drive -- which it promises to deliver by "early June" -- with hundred-dollar increments adding premium features like an additional 2GB of memory, a Blu-Ray drive, up to 1TB of storage, 802.11 b/g/n WiFi and Bluetooth. However, if you're simply looking for a compact keyboard computer (rather than reliving 80's nostalgia) there's another option on tap -- a likely rebadged thin wedge of a machine that Commodore's...